YCS150 mloader wa skid steer wa umeme

Name: YCS150 electric skid steer loader
SKU: 2438414

Uzito wa mashine：4950 kg

Uwezo wa ndoo：0.5m³

Nguvu iliyokadiriwa：32/3140+4×10/3140kW/rpm

Sifa ya bidhaa

1.Global first wheel side motor driving technology
2.Global first wheel side AUTO-HOLD technology
3.Chasi iliyounganishwa
4.Kiwango cha nguvu kimeongezeka kwa 25%
5.Imepunguza utulivu wa kazi kwa 15%
Muda wa betri umeongezeka kwa 40%

The Yuchai S150 electric skid steer loader adopts the global first wheel side motor driving，wheel side AUTO-HOLD technology and integrated chassis.It is together with features compact size,good trafficability, large operating range and comfortable driving experience, intelligent electronic control, green and environmentally friendly, low-failure rate and low-use cost.S150 supports fast charging function. By 1-hour fast charging, it can work for 8-9 hours. It can be used with a variety of attachments and widely used suitable for farms, forest farms, urban infrastructure, roads or construction sites, factories, and workshops, etc.

Kikundi	Parameta	Kipimo	Thamani
Parameta za Msingi	Uzito wa Mashine	kg	4,950
	Uwezo wa ndoo	m³	0.5
	Upana wa ndoo	mm	1,880
Mfumo wa Nguvu	Aina ya Betri	—	Lithium Iron Phosphate (LiFePO₄)
	Nguvu Iliyoainishwa	kW/rpm	32 kW @ 3,140 rpm + 4 × 10 kW @ 3,140 rpm (msaada?)
	Uwezo wa betri	N·m / N·m	105 / 140 (Kumbuka: Inawezekana imewekwa vibaya – angalia noti hapa chini)
Parameta za Utendaji	Mizani ya Kazi Iliyoainishwa	kg	1,620
	Uwezo wa kupinduka	kg	3,100
	Shinikizo la mfumo wa kufanya kazi	MPa	23 (uvumilivu: 0 hadi +0.5)
	Kiwango cha Mtiririko wa Hidroliki	L/min	87.1 + 51.1
	Nguvu ya Kuchimba (Iliyoongezeka)	kN	25
	Nguvu ya Kutupa	kN	24.5
	Kasi ya Juu Zaidi ya Kusafiri (Gia ya Chini/Juu)	km/h	10 / 20
	Kuchaji Haraka	—	30% → 80% katika saa 1
	Ustahimilivu wa Uendeshaji*	h	8–9
Mfumo wa Kuendesha	Aina	—	4-Magurudumu Huru ya Kuendesha Moja kwa Moja (Kama injini za umeme)
Vipimo vya uendeshaji	A – Urefu wa jumla wa uendeshaji	mm	4,280
	B – Urefu hadi juu ya kibanda	mm	2,065
	C – Angle ya Kutupa kwa Kimo Kikubwa	°	21.5
	D – Urefu wa Ardhi	mm	207
	E – Umbali kati ya magurudumu	mm	1,227
	F – Urefu wa jumla (bila ndoo)	mm	3,066
	G – Urefu wa Jumla (pamoja na kijiko cha kawaida)	mm	3,830
	H – Uwezo wa Kuinuka kwenye Ardhi Tambarare	°	31
	I – Urefu wa kupakua	mm	2,610
	J – Kimo hadi Pin ya Kijiko	mm	3,335
	K – Umbali wa kupakia kwenye urefu wa juu wa kupakua	mm	845
	L – Pembe ya kutupa (kwenye urefu wa juu)	°	41
	M – Mzunguko wa ndoo kwenye urefu kamili	°	98
	N – Upana wa Kijiko	mm	1,880
	O – Radius ya Mzunguko	mm	2,179
	P – Upana wa Magurudumu (Tread)	mm	1,507
	Q – Upana wa mashine	mm	1,832